Today I would like to describe step by step how to set up VoIP features of your Nokia mobile (for example E60, E61, E65, E70, N80, N92, N93, N95).
In this paricular example I chose as a VoIP provider
PBXES, which is not a provider but a ePBX service.
You can use whatever SIP provider you want. All you need to change (in most cases) is listed below:
- Your SIP address
sip:your_username-100@pbxes.org, to
sip:your_username@your_provider's_domain.
- Your username
sip:your_username-100 to
sip:your_username.
- SIP proxy/registrar server
sip:217.195.32.11 to the IP address of your provider's proxy/registrar server.
Before using VOIP features of your phone please make sure you have setup your “WiFi” connection.
1. On Nokia go to
Tools ->
Settings ->
Connection ->
SIP settings -> hit
Options and choose
Add new ->
Use default profile.
a) In
Profile name enter
pbxes.
b) In
Service profile choose
IETF.
c) In
Default access point choose your connection. You should choose WiFi. Do not expect acceptable call quality with GPRS connection.
d) In
Public user name enter your username you registered with PBXES (
sip:your_username-100@pbxes.org).
e) In
Use compression select
No.
f) In
Registration select
Always on.
g) In
Use security select
No.
2. Now you need to set up
Proxy server.
a) In
Proxy server address enter
sip:217.195.32.11.
b) In
Realm enter
pbxes.org.
c) In
User name enter
sip:your_username-100.
d) In
Password enter the password you created for your extension.
e) In
Allow loosing routing select
Yes.
f) In
Transport type choose
UDP.
g) In
Port should be
5060.
3. Now hit
Back and go to
Registrar server.
a) In
Registrar server address enter
sip:217.195.32.11.
b) In
Realm enter
pbxes.org.
c) In
User name enter
sip:your_username-100.
d) In
Password enter the password you created for your extension.
e) In
Transport type choose
UDP.
f) In
Port should be
5060.
4. Go to
Tools ->
Settings ->
Connection ->
Internet tel. -> hit
Options and choose
New profile.
a) In
Name enter
pbxes.
b) In
SIP profiles choose
pbxes.
Restart your handset. Now you should see “handset icon with earth” to appear on the very right of your status bar on the phone.
[PL] Dziś chciałbym przedstawić krok po kroku jak skonfigurować na twojej Nokii VoIP (na modelach E60, E61, E65, E70, N80, N92, N93, N95).
W tym przykładzie opisana jest konfiguracja usługi firmy
PBXES, która to usługa jest elektroniczną centralką PBX (częściową konfigurację usługi PBXES zamieściłem parę tygodni temu w poście
[PL] Własny numer dostępowy do taniego dzwonienia (z PBXes)).
Wg poniższego opisu możesz skonfigurować każdego operatora SIP jakiego chcesz. Wszystko co musisz zmienić jest wymienione poniżej:
- Twój adres SIP
sip:twój_login-100@pbxes.org, na
sip:twój_login@domena_twojego_operatora.
- Twój login
sip: twój_login-100 to
sip: twój_login.
- SIP proxy/registrar serwer
sip:217.195.32.11 na adres IP serwera proxy/registrar twojego operatora.
Przed stosowaniem funkcjonalności VoIP upewnij się że skonfigurowałeś połączenie „WiFi”.
1. W menu twojej Nokii idź do
Tools ->
Settings ->
Connection ->
SIP settings -> wybierz
Options a następnie
Add new ->
Use default profile.
a) W
Profile name wprowadź
pbxes.
b) W
Service profile wybierz
IETF.
c) W
Default access point wybierz twoje preferowane połączenie. Powinnieneś wybrać WiFi. Nie oczekuj dobrej jakości połączenia przy korzystaniu z GPRS (raczej spróbuj UMTS).
d) W
Public user name wprowadź twój login, do swojego konta na PBXES plus
-100@pbxes.org (
sip:twój_login-100@pbxes.org).
e) W
Use compression wybierz
No.
f) W
Registration wybierz
Always on.
g) W
Use security wybierz
No.
2. Teraz musisz ustawić
Proxy server.
a) W
Proxy server address wprowadź
sip:217.195.32.11.
b) W
Realm wpisz
pbxes.org.
c) W
User name wpisz
sip:twój_login-100.
d) W
Password wprowadź hasło, które utworzyłeś dla swojego rozszerzenia (extension – linii wewnętrznej).
e) W
Allow loosing routing wybierz
Yes.
f) W
Transport type wybierz
UDP.
g) W
Port wpisz
5060.
3. Teraz wybierz
Back I przejdź do
Registrar server.
a) W
Registrar server address wprowadź
sip:217.195.32.11.
b) W
Realm wprowadź
pbxes.org.
c) W
User name wpisz
sip:twój_login-100.
d) W
Password wprowadź hasło, które utworzyłeś dla swojego rozszerzenia (extension – linii wewnętrznej).
e) W
Transport type wybierz
UDP.
f) W
Port wpisz
5060.
4. Przejdź do
Tools ->
Settings ->
Connection ->
Internet tel. -> Wybierz
Options a następnie
New profile.
a) W
Name wprowadź
pbxes.
b) W
SIP profiles wybierz
pbxes.
Wyłącz i włącz komórkę. Teraz powinieneś zobaczyć „ikonkę słuchawki z symbolem Ziemii” po prawej stronie ekranu twojego telefonu.
Labels: en, gsm, pl, sip, voip